Browse our complete portfolio of specialized functional materials. Use the filter to explore by category.
Gap-filling material designed for longitudinal thermal conductivity. Builds vertical thermal channels from heat source to heat sink.
Fiberglass-reinforced silicone elastomer with good thermal conductivity and dielectric strength. Available with PI film substrate.
Dual-function material providing both thermal management and electromagnetic wave absorption for sensitive electronic assemblies.
Non-silicone thermal interface material for applications where silicone contamination must be avoided, such as optical and automotive sensors.
Standard silicone-based thermal gap filler providing reliable thermal transfer between heat-generating components and heat sinks.
Thermally conductive potting compound for electronic packaging, providing heat dissipation along with environmental protection.
Dual-component thermally conductive gel for gap filling applications. Cures at room temperature with good conformability.
Silicone-based thermally conductive potting adhesive offering high-temperature stability and good electrical insulation.
Liquid silicone foam adhesive providing thermal insulation and environmental sealing. Expands to fill irregular gaps.
Flexible, non-flame-retardant polyolefin tube for general-purpose insulation and bundling applications.
Flame-retardant flexible polyolefin tube offering reliable electrical insulation with self-extinguishing properties.
3:1 shrink ratio flame-retardant tube for covering irregular connectors and transitions with good recovery.
Ultra-thin wall flexible tube for space-constrained applications requiring minimal wall thickness after recovery.
Environmentally friendly halogen-free tube meeting low-smoke, low-toxicity requirements for enclosed spaces.
Enhanced flame-retardant tube with 3:1 shrink ratio for high fire safety in demanding applications.
4:1 high shrink ratio tube for covering large connectors and transitions with good flame-retardant performance.
High-performance flexible tube combining high flame retardancy with good mechanical properties.
Dual-color (yellow/green) identification tube for grounding wire marking with flame-retardant properties.
3:1 shrink ratio dual-color grounding identification tube with enhanced flame-retardant performance.
Specialized 4:1 shrink ratio tube with good flame-retardant properties for complex connector coverage.
Dual-wall tube with adhesive lining for environmental sealing. Outer wall provides flame-retardant insulation.
4:1 shrink ratio dual-wall tube with adhesive lining for high sealing of large transitions and connectors.
Semi-rigid medium-wall tube for mechanical protection and abrasion resistance in harness assemblies.
Semi-rigid flame-retardant dual-wall tube with adhesive lining for robust mechanical and environmental protection.
Thick-wall, semi-rigid, flame-retardant tube with 3:1 shrink ratio. Waterproof and abrasion-resistant. GJB150 compliant.
6:1 shrink ratio thick-wall tube with adhesive lining for extreme environmental sealing and mechanical protection.
High-temperature silicone rubber tube offering good flexibility, aging resistance, and electrical insulation.
Semi-rigid polyvinylidene fluoride tube with good chemical resistance and high-temperature performance.
Flexible PVDF tube combining chemical resistance with flexibility for dynamic applications.
High-performance fluororubber tube with good fuel, chemical, and high-temperature resistance for aerospace applications.
Thin-wall fluororubber tube for weight-sensitive applications requiring fuel and chemical resistance.
PTFE (Teflon) heat shrink tube offering high chemical resistance, high-temperature stability, and low friction.
Specialized elastomer tube with good diesel and fuel oil resistance for vehicle and military equipment applications.
Precision-molded boot for I-branch cable harness protection, providing environmental sealing and mechanical strain relief.
L-shaped molded boot for right-angle cable branch protection and sealing in harness assemblies.
Enhanced L-shaped molded boot with multi-branch configuration for complex cable harness geometries.
Large L-shaped molded boot for high-capacity cable harness branch protection with enhanced sealing.
Y-shaped molded boot for dual-branch cable harness splitting and environmental protection.
S-shaped molded boot for single-outlet cable harness end sealing and strain relief.
W-shaped molded boot for wide multi-branch cable harness configurations with comprehensive sealing.
High-temperature resistant crimp terminal with heat shrinkable sleeve for reliable wire termination in harsh environments.
Standard heat shrinkable crimp terminal providing insulated wire termination with environmental protection.
High-temperature marker tube for permanent wire and cable identification in demanding thermal environments.
Standard heat shrinkable marker tube for wire identification and labeling. Compatible with thermal printing systems.
Heat shrinkable protective boot for connector back-shell sealing, providing strain relief and environmental protection.
Heat shrinkable end cap for cable termination sealing, providing moisture and corrosion protection.
Self-fusing heat shrinkable insulation tape for high and low voltage applications. Provides permanent moisture-proof seal.
Rubber-based self-adhesive tape for electrical insulation. Self-amalgamating, providing good moisture barrier.
Self-adhesive waterproof sealing tape for cable joints, splices, and terminations requiring moisture barrier protection.
Dedicated waterproof sealing tape for environmental protection of electrical connections and junctions.
Multi-layer composite tape offering good abrasion resistance, waterproof sealing, and electrical insulation.
Enhanced composite tape with high anti-wear properties for cable protection in high-friction environments.
High-temperature resistant self-adhesive tape for insulation in thermal environments where standard tapes fail.
Silicone rubber self-adhesive tape for high-temperature thermal protection, offering good aging resistance.
Fluororubber self-adhesive tape with high chemical resistance for fuel and solvent-exposed applications.
Transparent self-adhesive tape allowing visual inspection of underlying connections while providing insulation.
Innovative tape that changes color at specific temperatures, enabling visual temperature monitoring of electrical connections.
Self-curing silicone strip that forms a permanent waterproof seal for irregular surfaces and gap filling.
Flame-retardant silicone rubber self-adhesive tape combining fire safety with high-temperature performance.
Two-component high-performance epoxy adhesive for structural bonding and electronic potting with good mechanical strength.
Modified polyurethane sealant for cable assembly potting, offering good flexibility, moisture resistance, and vibration dampening.
Polyurethane-based potting resin providing moisture resistance, electrical insulation, and vibration dampening for electronic assemblies.
Braided fiberglass sleeve for thermal insulation and mechanical protection of wires and cables in high-temperature environments.
Knitted fiberglass sleeve offering high flexibility and expandability for irregular cable bundle protection.
Specialized high-silica braided sleeve for extreme temperature protection up to 1000°C in aerospace and industrial applications.
Quartz fiber sleeve offering good thermal stability and chemical purity for extreme-environment applications.
Braided basalt fiber sleeve providing good thermal insulation and mechanical strength for high-temperature protection.
Knitted basalt fiber sleeve offering flexibility and thermal protection with good abrasion resistance.
Aluminum foil-coated fiberglass sleeve providing radiant heat reflection and thermal insulation for sensitive components.
Carbon fiber braided sleeve offering high strength-to-weight ratio and EMI shielding for advanced applications.
Aramid (Kevlar) fiber knitted sleeve providing good cut and abrasion resistance for cable protection.
PBO fiber knitted sleeve offering high thermal and mechanical performance among fiber sleeving products.
Snap-closure high-temperature sleeve for easy installation and removal without disconnecting cables or connectors.
Woven fiberglass tape for thermal insulation wrapping of pipes, cables, and high-temperature equipment.
Silicone-coated fiberglass tape providing enhanced thermal protection, moisture resistance, and electrical insulation.
Aluminum foil fiberglass tape for radiant heat reflection and thermal barrier wrapping in high-temperature applications.
Basalt fiber wrapping tape offering high-temperature thermal insulation with good mechanical durability.
Advanced nano-porous insulation felt offering ultra-low thermal conductivity with minimal thickness for space-constrained applications.
High-silica woven tape for extreme temperature insulation up to 1000°C in furnace and aerospace applications.
Self-adhesive high-silica tape combining extreme temperature resistance with easy application for thermal protection.
Quartz fiber binding wire for high-temperature tying and bundling of thermal insulation materials and components.
Nickel-carbon filled conductive adhesive for electromagnetic shielding and grounding applications. Provides reliable electrical conductivity with adhesive bonding.
We offer customizable specifications and formulations. Contact our technical team to discuss your requirements.
